Store Categories

First Stop Aquatics > Pumps & Powerheads > Tunze Accessories

Tunze Silence Clamp

Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.

Product Ref: 6065.65

Price: £13.57
(Including VAT at 20%)

Quantity:

Tunze Clamp

Tunze Clamp 6025.510

Product Ref: 6025.510

Price: £6.20
(Including VAT at 20%)

Quantity:

Tunze Safety Connector

Turbelle® stream 6101, 6201 and 6301 are pumps with an electronic motor.

Thus, they can be operated on any direct-current source (battery, solar cells) from 10 V to 24 V.

For a safe connection to the pump, we recommend the Turbelle® Safety Connector 6105.50, which contains a 4 amps fuse.

The safety connector permits normal operation with the TUNZE® power supply unit, but in case of a power failure it will automatically switch over to a car battery or a direct-current source.

Product Ref: 6105.500

Price: £35.39
(Including VAT at 20%)

Quantity:

Stream rock

For Turbelle® stream 6000, 6100 and 6060, 6080, consisting of white ceramic stone suitable for fresh water and salt water.

It permits a decorative integration of the circulation pump in the aquarium.

Product Ref: 6000.250

Price: £59.75
(Including VAT at 20%)

Quantity:

Nano Stream rock

For Turbelle® Nano stream 6025, 6045, 6055 consisting of white ceramic stone suitable for fresh water and salt water.

It permits a decorative integration of the circulation pump in the aquarium.

Product Ref: 6000.240

Price: £32.53
(Including VAT at 20%)

Quantity:

Magnet Holder 6080.50

Magnetic holder for all Turbelle® pumps and Comline.
The magnetic holder simplifies mounting of components at any position on the aquarium pane; encapsulated construction; requires only seconds for attachment.

For glass thickness of up to 12 mm (.47 in.)

Product Ref: 6080.500

Price: £28.21
(Including VAT at 20%)

Quantity:

Magnet Holder 6200.50

Product Ref: 6200.500

Price: £40.54
(Including VAT at 20%)

Quantity:

Magnet Probe Holder

This patented Probe holder has a very high holding power and can be fitted to every aquarium pane.

The Magnet Holder consists of a two-part magnetic shaped part. The inside unit is placed in the water and the external unit is attached to the outside of the aquarium; both parts are identical in shape.

On account of its encapsulated construction, the Nano Magnet Holder is resistant to corrosion, and causes no harmful effects for the aquarium biotope.

Supplied with two screws and M5x40 nuts, two cable fasteners, and 100 mm (3.9 in.) of hook-and-loop strip suitable especially for installation in water. Dimensions: diam. 50 x W 15 mm (.59 in.).