Store Categories

First Stop Aquatics > Overflow Boxes > Tunze Outlets and Accessories

Tunze Outlets

TUNZE® outlets with surface suction are an ideal solution for pressureless water supply below the aquariums.

An equal ratio of surface water and water from the lower water column are removed. The outlets remove only as much water as is pumped into the aquarium. On account of the light-protected construction, they are almost maintenance-free.

TUNZE® outlets are supplied ready for mounting, with detailed mounting instructions. Inlet and outlet pipes are not included.

Two outlet systems should be used in aquariums with more than 600 litres (158.5 US gal.).
At the outlet side, commercially available outlet pipes can be connected to the pipe sockets. However, we recommend the use of the outlet hose system 1075/2 to keep the noise as low as possible.

For the inlet, we recommend our inlet hose set 1073. The connecting hose for the pump in the cabinet is included.

Outlet for retrofit

Outlet for retrofit

The outlet 1074/2 does not require a borehole in the glass, and thus can be retrofitted.

Even after an interruption of the recirculation pump, it will continue to operate. In combination with the outlet hose and fittings 1075/2, the outlet can be used up to abt. 1,200 l/h (317 USgal./h).

With additional overflow 1001.74, it can be used up to 1,500 l/h (396 USgal./h).

Product Ref: 1074/2

Price: £90.72
(Including VAT at 20%)

OUT OF STOCK

Wall outlet for glass boreholes

Wall outlet for glass boreholes

The Wall outlet 1076/2 is used for installation in aquariums with boreholes (43 to 45 mm / 1.6 to 1.7 in.) in the rear or lateral walls.

In combination with outlet hose and fittings 1075/2 the outlet can be used up to abt. 1.500 l/h (396 USgal./h).

Product Ref: 1076/2

Price: £82.18
(Including VAT at 20%)

Quantity:

Outlet hose

Outlet hose

Consisting of 2m (78.7in.) special outlet hose, diam. 40mm (1.57in.), with clamps and holder.

Product Ref: 1075/2

Price: £29.04
(Including VAT at 20%)

Quantity:

Inlet hose and fittings

Inlet hose and fittings

Consisting of four pipes, diam. 25 mm (.98 in.) x 1 m (39.3 in.) and three sleeves, diam. 25 mm (.98 in.), seven 90° angles, connecting hose and clamps.