Store Categories

First Stop Aquatics > Aquatronica Aquarium Controller System
& Accessories > Modules

Tunze Pump Module

The Tunze® Pumps Module enables 12V TunzeR motion pumps to be controlled by the Aquarium Controller System. The module allows the user to utilize the Controller and/or a PC (through a USB interface) to set up one or more programs that produce a dimmable wave or tide effect using the pumps connected to the system.

The module permits connection to the pumps and replaces the Single Controller or Multicontroller. With its great flexibility, the system can reproduce a host of effects using various combinations of pumps at different times of the day. Also, when connected to a day/night brightness sensor system (optional), it can automatically reduce pump operation to minimum speed during the night, which diminishes the wave action in the aquarium.

The ability of the system to handle up to 4 modules (16 pumps) at the same time also allows the user the control multiple tanks separately and obtain very powerful effects in large tanks.

The module consists of:

1 connector for connecting to the Aquatronica bus
4 connectors for connecting to the pumps
1 connector for the day/night sensor

TECHNICAL DATA

Recommended pumps: Turbelle electronic pumps

NOTES
The packages includes also no.2 cables for the connection of the Tunze pumps. In order to connect 4 pumps it is necessary to buy the accessories kit (ACQ428).

Product Ref: ACQ460

Price: £44.99
(Including VAT at 20%)

Quantity:

ACTIVE HUB

Active Hub allows other Aquatronica accessories to be connected to the Control systems, when every connector on the multioutlets is already being used for other connections.

The Active Hub consists in 6 data connectors (BUS) and a power jack to connect the adapter.

The adapter supplied complies with all applicable standards.

TECHNICAL DATA

I/O connectors: 6
power supply voltage: 115V 60 Hz - 220V 50 Hz
max working current: 500 mA

Product Ref: ACQ215

Quantity:

Three Channel Dosing Pump

Aquatronica dosing pumps guarantee the possibility of metering liquids in your aquarium.
the module consists in 3 peristaltic pumps which function independently and allow the following types of dosage:

single dosage: allows a pre-established quantity of the substance to be administered at a set time and on set days;
repeated dosage: allows a dosage to be repeated at regular intervals (hours - days);
weekly dosage: allows the desired dosage to be administered only on set days of the week;
distributed dosage: the desired substance is administered evenly over a set time lapse.
The dosing pumps by Aquatronica are also used to dispense elements based on data supplied by the electrodes connected to the system: this innovative function proves useful to automatically correct the biological balance of the water. There are also 3 optional connectors that can be used in the future to connect feasible stirring systems to the module for dispensing insoluble elements that would otherwise tend to settle on the bottom.

TECHNICAL DATA

Power supply voltage: 115V 60Hz - 220V 50Hz
Number of pumps: 3
Min. resolution: 1 ml
Accuracy: ± 5%

Product Ref: ACQ450

Price: £265.00
(Including VAT at 20%)

Quantity:

SMS Module

The SMS module is used to send messages from/towards mobile phones, via remote connection, and to receive information on the state of your aquarium. Such as:

triggered system alarms;
black-out warnings and a subsequent signal when the power is turned back on (thanks to the internal battery);
you can ask the control unit for the list of chemical values of the water detected by the sensors.
The firmware inside the SMS module can be continually updated on-line.

TECHNICAL DATA

Power supply voltage: 115V 60Hz - 220V 50Hz
SIM connector: inside the module
Antenna: supplied
Battery: 4 - AA format - non rechargeable

Product Ref: ACQ240

Price: £307.57
(Including VAT at 20%)

Quantity:

ETHERNET Module

Thanks to the Ethernet module and a remote connection, it is possible to dialogue via internet or LAN networks.

This allows the user to check the Aquarium Controller in two distinct ways:

by connecting from any internet point, via a browser;
by connecting to a LAN network.
In both cases, you can monitor the parameters related to your aquarium and adjust the state of the outlets of the power unit. You can also receive warning e-mails for feasible alarms in the system and periodic information on the parameters of your aquarium.

ATTENTION: the Aquatronica ethernet module mailing service does not currently support email providers that require SSL (Secure Socket Layers, to encrypt data)