Store Categories

First Stop Aquatics > Aquatronica Aquarium Controller System
& Accessories > Interfaces

USB PC Interface

The USB PC kit consists of a USB PC interface and a PC software.

Thanks to this kit, the Aquarium Controller system can be connected to a PC to download data, program settings and run software updates. With this kit the Aquarium Controller system can also be connected to a PC with a USB port.

The Aquatronica PC software allows you to:

make all settings desired on the system and monitor the data concerning the sensors and connected multioutlets directly from a PC
view the data stored from the various sensors connected to the system in graphic form and monitor their progress in real time
download the new software and firmware versions and keep them constantly up to date

Product Ref: ACQ222

Price: £57.04
(Including VAT at 20%)

Quantity:

Water Leakage
Interface

The water leakage interface is used to connect one or two water leakage sensors to the system. By using this interface, combined with the relevant water leakage sensor (code ACQ320), you can detect feasible leakages of water and act consequently on the multi-outlets connected.

The ACQ210N-WL interface consist of:

a connector for the BUS connection to the system via relative connection cable;
two connectors for connecting the sensors mentioned above.
The moment the interface is connected to the system, it will automatically identify the sensor “Plug & Play” as well as enable the relevant configuration menu.

Product Ref: ACQ210N-WL

Price: £50.18
(Including VAT at 20%)

Quantity:

Low Range Conductivity Interface

Low Range Conductivity Interface for measuring and checking the value of the Conductivity in fresh water aquariums, by connecting an Aquatronica Low Range conductivity electrode.
This interface consists of:

a connector for the BUS connection to the system via relative connection cable;

a connector for the connection to the electrode.
The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.

Product Ref: ACQ210N-MS

Price: £52.04
(Including VAT at 20%)

Quantity:

Temp & Level Interface

The Temperature & Level Interface lets the user connect additional Aquatronica
temperature and level sensors.
This consists of:

a connector for the BUS connection to the system via relative connection cable;

two connectors for connecting the sensors mentioned above.
The moment the interface is connected to the system, it will automatically identify
the sensor “Plug & Play” as well as enable the relevant configuration menu.

Product Ref: ACQ210N-TL

Price: £48.32
(Including VAT at 20%)

Quantity:

Redox Interface

Redox Interface for measuring and checking the ORP value (Oxide-Reduction Potential) in the aquarium, by connecting an Aquatronica ORP electrode.
This interface consists of:

a connector for the BUS connection to the system via relative connection cable;

a standard BNC connector for connecting the electrode.

The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.

Product Ref: ACQ210N-RX

Price: £52.04
(Including VAT at 20%)

Quantity:

PH Interface

PH Interface for measuring and checking the pH in the aquarium, by simply connecting an Aquatronica pH electrode.
The PH interface consists of:

a connector for the BUS connection to the system via relative connection cable;

a standard BNC connector for connecting the electrode.

The moment the interface is connected, it will automatically be identified by the system “Plug & Play” as well as enable the relevant configuration menu.